1. Make sure that there is no disc in the tray and switch on the player.
2. Cold start the player, by holding down the PLAY and STOP buttons on the player.
3. You should see a set of language options. Release the PLAY and STOP buttons.
4. Select your language.
5. Press REPEAT then the following codes for the required region the player is already set to (region you bought the player in):
Region 1 - 2, 9, 3, 3, 4
Region 2 - 3, 8, 7, 6, 7
("E series M105", M205 and M305 users try: 57538)
Region 3 - 5, 6, 7, 3, 2
Region 4 - 7, 6, 8, 8, 4
Region 5 - 5, 3, 8, 1, 4
Region 6 - 2, 4, 4, 6, 2
6. A code will appear, indicating the region setting of your player.
7. Press 9 for region-free, or 1 for region 1, 2 for region 2, etc.
8. Press OPEN/CLOSE on the Player to open the disc tray.
9. Press STANDBY (POWER) on the remote control to close the tray. Next time the player is turned on it will set to the region specified. If the player halts on the FBI Warnings, press Forward Search x2 or faster.
On some models, you will have the ability to disable Macrovision, but you will have to turn off the Quasi-PAL option and set the SCART output type to Video rather than RGB.
The 611 may not have Dolby 5.1 output after applying the hack, so you may need to change the PCM format to Dolby5.1 again. The sound mode for digital (PCM or bitstream) can be set in the Setup mode, under Sound Setup.
You can reset the region setting from 9 to a specific region by setting PCM to bitstream again and DTS to ON.
If you are unsuccesfull with the above code then it may be worth trying one of the resources below.
Please confirm the code worked for you by leaving a testimonial with your thoughts on how easy or hard it was. This will improve our service. Please leave a Testimonial.
