Use the remote if not stated otherwise.
1. Without any discs inserted, POWER ON the player. Press and hold at the same time PLAY and STOP buttons on the player. A language menu should appear after a few seconds.
2. Press 1 for English (or the number corresponding to your preferred choice of language). Apparently this resets your DVD player and is allegedly a good thing to do before applying hacks.
3. Press REPEAT on the remote. (NOT the "REPEAT A-B" button).
4. If your DVD player is:
Region 1 coded type: 2 9 3 3 4
or,
Region 2 coded type: 3 8 7 6 7
or,
Region 3 coded type: 5 6 7 3 2
or,
Region 4 coded type: 7 6 8 8 4
or,
Region 5 coded type: 5 3 8 1 4
or,
Region 6 coded type: 2 4 4 6 2
(So if your dvd player only plays dvd's that are
region 1 coded you would type 2 9 3 3 4 )
(There exists an alternate number for Region 2 players that can be found somewhere in this forum (57538?). I guess it's used for different firmware versions)
5. After you enter the 5-digit number a number indicating your current region number will appear in the upper left corner of the screen, e.g. "02".
6. Quickly, before it disappears press 9 for all regions, or you can choose region 1-6 if you want.
7. Press OPEN/CLOSE. The tray will open. Wait for 15 seconds.
8. Press POWER OFF and wait for 15 seconds before turning back on. If you pressed 9 earlier you're now the proud owner of a region free Samsung DVD-S128 player!
If you are unsuccesfull with the above code then it may be worth trying one of the resources below.
Please confirm the code worked for you by leaving a testimonial with your thoughts on how easy or hard it was. This will improve our service. Please leave a Testimonial.
