1. Turn Player on with no disc inside
2. Press pause on the remote control
3. Then key in 3 1 4 1 5 9
[CODE -- will then be displayed on the player display]
4. Key in desired Region number
[0 for Auto Multi Region, or manually select 1 to 6]
5. Then Press Pause again
6. Turn off player and wait 5 seconds, then back on again.
If you are having problems getting the hack to work, try pressing stop on the remote before you press pause for the first time.
OR
1. Turn on system with no disc, wait until "NO DISC" is displayed.
2. Press pause on remote.
3. Press the following sequence: 1, 4, 7, 2 (This enables you to edit some of the system variables if you would call them that)
4. Press UP 3 times to get to the 04 variable (on the left side) and on my display it originally was 0C but it might be different but it shouldn't matter.
5. This is a 16 bit variable, where the bits are flags: 01100110 activates the four listed items above, but I can't figure out how to activate HD yet, which is possibly also on my machine. That number is 66, so just enter 66 on the number pad.
6. Press Enter
7. turn machine on and off.
8. play with the stuff that works.
If you try the hack, make sure you make note of the number that is in the 4th variable spot before you change it to 66. If the video and/or audio start stop working return that number to the original using the same proceedure.
Please confirm the code worked for you by leaving a testimonial with your thoughts on how easy or hard it was. This will improve our service. Please leave a Testimonial.
