You can perform this hack as many times as you want and the currently selected Region will stick until you change it again. Only a very long power cut may cause the player to revert to the factory default setting of Region 2 (in which case just perform the hack again).
An odd quirk of this hack is that even when you specifically set the player to Region 1 only, it will still play discs from Region 2! This is actually quite useful if your collection consists of some RCE protected Region 1 titles and also Region 2 discs which do not (normally) have RCE.
If you are having trouble getting the hack to work, try pressing
Power on the player with no disk in the drive
Press "PAUSE" on the remote
Enter "3 1 4 1 5 9" on the remote (the word COdE appears on the display)
Enter "0" on the remote (0 = All Regions, 1 = Region 1, 2 = Region 2, etc.)
Press "PAUSE" on the remote
Power the player off and then back on
If you are having trouble getting the hack to work, try pressing "STOP" on the remote before you press "PAUSE" for the first time.
end Quote.
Please confirm the code worked for you by leaving a testimonial with your thoughts on how easy or hard it was. This will improve our service. Please leave a Testimonial.
