1) Open the tray
2) Input the numerical sequence 2180 followed by the zone number of the software you wish to play. This is shown on the DVD as number inside a world globe. (Use 9 for multizone)
3) Close the tray
Things to check
1) If playing disc from Zone 1 the TV should be a multi system with NTSC play-back.
2) Check the MENU setting to ensure that the settings match the software being played.
3) Check the SETUP settings to ensure that the settings match the software being played.
4) The DVD is controlled by a 486 computer chip. If the machine "freezes" it cloud be that the chip needs to be refreshed. To do this turn off at the power source and let it stand for about 30 seconds. Then turn it back on and it should be right.
Macrovision
1) Open the tray.
2) Input the numerical sequence 45611.
3) Close the tray.
4) To reset Macrovision protection input 45610 and close tray.
Please confirm the code worked for you by leaving a testimonial with your thoughts on how easy or hard it was. This will improve our service. Please leave a Testimonial.
