Press (on remote):
Open - setup - 9 - 4 - 0 - 1 - 0 - step - shuffle - next
Turn on and off and all regions are supported.
Specific region:
Replace the '9' with a '1', '2' ... etc for the specific region
Or
If your DiViDo is bought before the 1st of November 2000 you can do the following:
1. Connect the DiViDo with your TV and choose the right channel on your TV.
2. Activate the DiViDo without placing a DVD in it.
3. Place the batteries in the RC and push 'SET-UP' once.
4. After that you push 'TITLE' once.
5. After that you push 'STEP' once.
6. After that you push 'NEXT' once.
7. Now you've activated a hidden menu of the player and it is possible to change different settings like the region!
8. Now it's possible to play DVD's from every region! Have fun!
If your DiViDo is bought after the 1st of November 2000 you can do the following:
1. Connect the DiViDo with your TV and choose the right channel on your TV.
2. Activate the DiViDo.
3. Place the batteries in the RC and push 'OPEN' once.
4. After that you push 'SETUP' once.
5. After that you push: 9 - 4 - 0 - 1 - 0 -
(Like this: 94010)
6. After that you push 'STEP’ once.
7. After that you push 'SHUFFLE' once.
8. And last but not least you push 'NEXT'
9. Now, if you deactivate and activate your DiViDo it will be free of regions, so you can watch all DVD-movies!
If you only want to set 1 particular region, for example region 1, you'll have to do the same programming sequence, but instead of the 9 in step 5 you'll place 1 (for region 2 ==> 2, etc.)
You can check which region-code is set in your DiViDo at the moment. Take your RC and push: 'OPEN' 'SETUP 'SHUFFLE' 'STEP' ‘NEXT’.
Now you've got a hidden menu and at the bottom you can see at 'DEBUG' the region that has been set. Region free is '9'
Please confirm the code worked for you by leaving a testimonial with your thoughts on how easy or hard it was. This will improve our service. Please leave a Testimonial.
