Power on the unit and open the DVD door by press
"Open" button on the front panel.
Use remote input ID number 33088.
You will see on the top left of the screen appear
"****"
Then add one more digit after 33088 according to
Following regional code index.
1 area1
2=2
3=3
...
0=all region
Or
1. Power the DVD player up.
2. Open the DVD door by pressing the "OPEN" on the front panel.
3. Press the "SETUP" on the remote control. Then you will se the DVD player menu.
4. Then press 33088 followed by
1 for region1
2 for region2
...
0 for all regions
5. In the on screen the DVD player writes R1 for region 1 and so on.
Or
Power on the unit and open the DVD door by pressing the "OPEN" button on the front panel
Press SETUP
Use the Remote Control to enter the following numbers 3, 3,0,8,8
U will see in the top left of the screen "****" appear
Key in a number corresponding to the Region you desire your player to be set to, i.e. 1 for Region 1, 2 for Region 2 and so on, use 0 for Region free
If you are unsuccesfull with the above code then it may be worth trying one of the resources below.Please confirm the code worked for you by leaving a testimonial with your thoughts on how easy or hard it was. This will improve our service. Please leave a Testimonial.
