1. in status NO DISC or DVD on screen (tray closed)
2. Press 7 > 7 > PLAY
3. SYSTEM SETUP will show on screen
4. Press ENTER key in COUNTRY CODE of 3rd line
5. COUNTRY CODE will be changed to "---" status
6. Press "0" and ENTER (changes C CODE to "0" status)
7. Press SETUP key
Or
1. Open DVD tray
2. Enter 0520 using remote
3. Press keys in this order: UP, DOWN, LEFT, RIGHT
4. Enter region code, 0 for complete code free
5. Close DVD tray
Or
1. Make sure disc tray is empty
2. Turn on unit and put unit in DVD mode so that DVD or NO DISC shows on screen
3. Press the following keys in order:
7, >, 7, >, PLAY (the > key is next to the enter key, and is NOT the FAST FORWARD or NEXT key)
4. A menu will appear on the screen. Scroll down to the 3rd line (COUNTRY CODE) and press ENTER
5. Key in the number of the region you want to change to, or key in 0 for region free.
6. Press ENTER
7. Press SET UP (this key is to the bottom left of the enter key
Your unit is ready to play DVDs!
If you are unsuccesfull with the above code then it may be worth trying one of the resources below.Please confirm the code worked for you by leaving a testimonial with your thoughts on how easy or hard it was. This will improve our service. Please leave a Testimonial.
